Company news
  • CoreRise Released Reliable TLC Industrial SSD
  • Date:2018-09-20 Clicks:92
  • Aug.11th , 2018 Suzhou, China-CoreRise Released their first reliable TLC Industrial SSD.

    Once TLC released, many people pay much attention to it. In past years, many system integrators had adapted industrial TLC SSD. However, after months’ usage, many of them complained about TLC SSD’s defectives and refused to use them anymore. The first problem they encountered is “fake block” when operating under -10℃ or above 40℃. There would be plenty of grown bad blocks which cannot be recovered by controller or FW before it become dead. The second problem they suffered was the weakness of common TLC SSD for industrial applications. Engineers would soon found that the TLC SSD become unstable or even “dead” while old type SSD not.

    CoreRise RD team had discovered such issues long before. That is why there is no similar products of CoreRise on the market. The design was hold before the TLC SSD can pass the CoreRise standardized hundreds tests in 57 categories. After 17 months optimization, finally, CoreRise made it. Comay Jupiter SCT 525XT is one of the latest industrial TLC SSD of CoreRise. It is a 2.5’’ SATA III SSD built with TLC Flash chips.

    Targeting industrial application, it employed CoreRise unique technologies to enhance the reliability and robustness. Both of the issue mentioned above on common TLC SSDs are solved. Moreover, CoreRise Comay TLC SSD can withstand extreme power supply voltage fluctuates up to ±10%, which is much better than common 5%. It is very important for industrial use, especially for applications which use battery or unstable power supply.

    Comay Jupiter SCT 525XT is one of the latest industrial TLC SSD of CoreRise. It is a 2.5’’ SATA III SSD built with TLC Flash chips. Targeting industrial application, it employed CoreRise unique technologies to enhance the reliability and robustness. Both of the issue mentioned above on common TLC SSDs are solved. Moreover, CoreRise Comay TLC SSD can withstand extreme power supply voltage fluctuates up to ±10%, which is much better than common 5%. It is very important for industrial use, especially for applications which use battery or unstable power supply.

    Jupiter SCT 525XT SSDs are competent for general industrial applications such as ATM, POS, commercial PC, super-bank-counter, thin-client, etc, while saving much cost compared to MLC products. However, we strongly suggest that you shall NOT use them on missions critical.

    Besides, the halfslim SATA and m SATA SSD based on same technology architecture have been in massive production stage.

    Jupiter SCT 525XT offers:

    -TRIM, NCQ w/queue depth of 32 and SMART
    -2.5’’SATA form factor -1.5, 3.0 and 6.0Gb/s transfer rates
    -60GB to 480GB capacities
    -Voltage: DC5V ± 10%
    -BOM (Bill-Of-Material) Controlled
    -Altitude spec of 100,000 feet
    -Industrial ECC and defect management
    -1,500G shock; 3G vibration(15G optional)
    -CE RoHS FCC Certificated